 
        | Picture | Model | Outline (mm) | Mounting Type | lllumination | IP Rating | 
|---|---|---|---|---|---|
|  | tact switch 3x6mm without ground terminal | 6.00mm x 3.75mm | Surface Mount | Non-llluminated | IP4X | 
|  | On off latching push button switch | 8.50mm x 8.50mm | Through Hole | Non-llluminated | No IP Rating | 
|  | illuminated tact switch | 6.80mm x 6.80mm | Through Hole | llluminated | IP4X | 
|  | Illuminated smd tactile tact switch | 6.80mm x 6.80mm | Surface Mount | llluminated | IP4X | 
|  | Waterproof bracket tact switch | 6.00mm x 6.00mm | Right Angle | Non-llluminated | IP67 | 
|  | vertical tact switch manufacturers | 7.40mm x 7.40mm | Right Angle | Non-llluminated | IP4X | 
|  | DIP 2 pin momentary tactile switch | 6.00mm x 6.00mm | Through Hole | Non-llluminated | IP4X | 
|  | Snap in type 12×12 tact switch | 12.00mm x 12.00mm | Through Hole | Non-llluminated | IP4X | 
|  | 12x12 waterproof Tact Switch | 12.00mm x 12.00mm | Through Hole | Non-llluminated | IP67 | 
|  | New material SMD 12*12 IP67 Tact Switch | 12.00mm x 12.00mm | Surface Mount | Non-llluminated | IP67 | 
|  | Flat push button lock switch pa66 high temperature resistant lacthing switch | 5.80mm x 5.80mm | Through Hole | Non-llluminated | No IP Rating | 
|  | J bend 5.2*5.2mm brass smd tact switch | 5.20mm x 5.20mm | Surface Mount | Non-llluminated | IP4X | 
|  | Through hole Dip 4 pole 6*6 tact switch | 6.00mm x 6.00mm | Through Hole | Non-llluminated | IP4X | 
|  | 6mm thru hole 0.05A 12V tact switch for PCB | 6.00mm x 6.00mm | Through Hole | Non-llluminated | IP4X | 
|  | 2 Pin 6x6x5mm Momentary Push Button Tact Switch | 6.00mm x 6.00mm | Through Hole | Non-llluminated | IP4X | 
|  | Momentary microswitch 6*3.5mm 2 pin tact switch | 6.00mm x 3.50mm | Through Hole | Non-llluminated | IP4X | 
Copyright © 2025 Wenzhou Gangyuan Electronics Co., Ltd.. All Rights Reserved. Power by
 
                    IPv6 network supported